Skip to main content

Loudspeakers Setup / 扬声器安装

🎤 Loudspeakers Team / 扬声器组

Team / 小组 Members / 成员
Loudspeakers / 扬声器 • Alex Jang 🔑
• Yuto Nomura
• Prasert
• Kittikhun

🇬🇧 English Instructions

Purpose
Measure chair distances according to the schematics and install loudspeaker groups 1-5 for the audience, stage, and accounting/departments.

Required References

  • Full Drawing Set: 📎 Complete PDF
  • Specific Schematics:
    • 1-1 Seating Layout Plan
    • 1-2 Audio Equipment Layout Plan
    • 4-1 Stage Area Equipment Layout
    • 6-2 Loudspeaker Wiring Diagram
    • 6-3 Audio Loudspeaker Wiring Diagram
    • 6-8 Audio Equipment Schedule
  • Event Content List: Cases PLS-1, ALS-4, TP-1, SES-1

Required Equipment Cases

  • PLS-1: Contains the SPK08FT passive loudspeakers used for groups 1-4 (main sound and stage monitors), plus Speakon splitters, cables, and extenders.
  • ALS-4: Contains the TOPP Pro X-8A active loudspeakers used for group 5 (stage department).
  • TP-1: Contains the adjustable elevator tripods to elevate all loudspeakers.
  • SES-1: Contains heavy-duty 5kg sandbags to secure the tripods.

Loudspeaker & Splitter Schedule

From Page 6-8 Audio Equipment Schedule

ID Model Qty Case Location Notes
SPK-1.1, 1.2, 1.3 SPK08FT 3 PLS-1 Main Stage Main sound, row 1
SPK-2.1, 2.2, 2.3 SPK08FT 3 PLS-1 Seating Area Main sound, row 2
SPK-3.1, 3.2, 3.3 SPK08FT 3 PLS-1 Seating Area Main sound, row 3
SPK-4.1, 4.2 SPK08FT 2 PLS-1 Stage Stage monitor
SPK-5.1, 5.2 X8A 2 ALS-4 Stage Department Department sound
LSCS-01 Speakon Splitter 1 PLS-1 Stage Loudspeaker cable splitter
LSCS-02 Speakon Splitter 1 PLS-1 Audio Control Desk Loudspeaker cable splitter

Setup Steps

1. Measure Distances
Schematics: Pages 1-1 Seating Layout Plan, 1-2 Audio Equipment Layout Plan

  • First, measure chair distances according to the schematics, including speakers, stage, aisles, and seating sections.
🗺️ View Associated Schematics (Pages 1-1, 1-2)
1-1 Seating Layout Plan showing stage position, seating sections, and room layout / 座位布局图，显示舞台位置、座位区域及场地布局

1-2 Audio Equipment Layout Plan showing loudspeaker positions, audio headend, and sound coverage direction / 音频设备布局图，显示扬声器位置、音频主控设备及声音覆盖方向

2. Position Equipment

  • Bring the loudspeaker cases (PLS-1, ALS-4) and the elevator tripods (TP-1) to the installation areas.
  • Bring the 5kg heavy-duty sandbags (SES-1) to secure the tripods.

3. Install Loudspeaker Groups 1 to 5
Schematics: Pages 1-2 Audio Equipment Layout Plan, 4-1 Stage Area Equipment Layout, 6-8 Audio Equipment Schedule

  • Install loudspeaker groups 1-5 according to the schematics and the table above. Groups 1, 2, and 3 (SPK08FT) are for the main sound; Group 4 (SPK08FT) is for stage monitors; Group 5 (X8A) is for department sound.
  • Mount all loudspeakers on Tripod TP-1 with an approximate 5-degree downward tilt.
  • Set the height of the loudspeakers to 2.5m, except for SPK-1.2, which should be set to 2.4m.
  • Use the 5kg sandbags to secure the tripods.
🗺️ View Associated Schematics (Pages 1-2, 4-1, 6-8)
1-2 Audio Equipment Layout Plan showing loudspeaker positions, audio headend, and sound coverage direction / 音频设备布局图，显示扬声器位置、音频主控设备及声音覆盖方向

4-1 Stage Area Equipment Layout Large Scale View showing microphones, speakers, monitors, LED walls, and power distribution around the stage / 舞台区域设备布局大比例图，显示麦克风、扬声器、显示器、LED 屏幕及舞台电源分配

6-8 Audio Equipment Schedule listing microphones, wireless receivers, audio interfaces, intercom equipment, loudspeakers, and related audio equipment / 音频设备清单，列出麦克风、无线接收器、音频接口、对讲设备、扬声器及相关音频设备

4. Connect Wiring
Schematics: Pages 6-2 Loudspeaker Wiring Diagram, 6-3 Audio Loudspeaker Wiring Diagram

  • Connect the routed Speakon cables to Groups 1–4 and the XLR cables to the Group 5 active speakers.
  • Attach the wiring before raising the speaker to the desired height.
🗺️ View Associated Schematics (Pages 6-2, 6-3)
6-2 Loudspeaker Wiring Diagram showing SPK08FT loudspeaker connections, SpeakON splitters, and amplifier outputs / 扬声器接线图，显示 SPK08FT 扬声器连接、SpeakON 分配器及功放输出

6-3 Audio Loudspeaker Wiring Diagram showing main stage monitor speakers and stage department sound connections / 讲台及部门扬声器接线图，显示主舞台监听扬声器及舞台部门声音连接

Completion Checklist

  • Distances measured
  • Loudspeaker groups 1-5 installed
  • Height set to 2.5m (SPK-1.2 at 2.4m)
  • Downward tilt set to 5 degrees
  • Tripods secured with sandbags
  • Cables connected before raising
  • Keyman inspection completed

Dismantling Procedure

  • Wait for the department briefing and prayer 30 minutes after the program ends on Sunday before dismantling.
  • Lower the tripods and disconnect the cables carefully.
  • Gather all equipment and bring it to the designated area.
  • Note for team leader: Use the Bill of Materials (BOM) to cross off every box or case before it is brought to the truck:
    • PLS-1
    • ALS-4
    • TP-1
    • SES-1

🇨🇳 中文说明

目的
根据图纸测量椅子距离，并安装观众区、讲台和会计/部门的 1-5 组扬声器。

参考资料

  • 完整图纸： 📎 完整 PDF 文件
  • 相关图纸：
    • 1-1 座位布局图
    • 1-2 音频设备布局图
    • 4-1 舞台区域设备布局图
    • 6-2 扬声器接线图
    • 6-3 讲台及部门扬声器接线图
    • 6-8 音频设备清单
  • 大会设备清单： 设备箱 PLS-1, ALS-4, TP-1, SES-1

所需设备箱

  • PLS-1： 包含用于 1-4 组（主音响和讲台监听）的 SPK08FT 被动扬声器，以及 Speakon 分配器、线缆和延长线。
  • ALS-4： 包含用于第 5 组（讲台部门）的 TOPP Pro X-8A 有源扬声器。
  • TP-1： 包含用于所有扬声器的可调节升降三脚架。
  • SES-1： 包含用于固定三脚架的重型 5 公斤沙袋。

扬声器及分配器清单

摘自图纸 6-8 音频设备清单

编号 型号 数量 设备箱 位置 备注
SPK-1.1, 1.2, 1.3 SPK08FT 3 PLS-1 主讲台 主音响，第 1 排
SPK-2.1, 2.2, 2.3 SPK08FT 3 PLS-1 观众区 主音响，第 2 排
SPK-3.1, 3.2, 3.3 SPK08FT 3 PLS-1 观众区 主音响，第 3 排
SPK-4.1, 4.2 SPK08FT 2 PLS-1 讲台 讲台监听
SPK-5.1, 5.2 X8A 2 ALS-4 讲台部 部门音响
LSCS-01 Speakon 分配器 1 PLS-1 讲台 扬声器线缆分配器
LSCS-02 Speakon 分配器 1 PLS-1 音频控制台 扬声器线缆分配器

安装步骤

1. 测量距离
图纸：1-1 座位布局图、1-2 音频设备布局图

  • 首先，根据图纸测量椅子距离，包括扬声器、讲台、通道和座位区域等。
🗺️ 查看相关图纸（图纸 1-1, 1-2）
1-1 Seating Layout Plan showing stage position, seating sections, and room layout / 座位布局图，显示舞台位置、座位区域及场地布局

1-2 Audio Equipment Layout Plan showing loudspeaker positions, audio headend, and sound coverage direction / 音频设备布局图，显示扬声器位置、音频主控设备及声音覆盖方向

2. 摆放设备

  • 将扬声器箱（PLS-1, ALS-4）和三脚架 (TP-1) 移动到安装区域。
  • 拿取 5 公斤重型沙袋 (SES-1) 来固定三脚架。

3. 安装 1 至 5 组扬声器
图纸：1-2 音频设备布局图、4-1 舞台区域设备布局图、6-8 音频设备清单

  • 根据图纸和上表安装 1-5 组扬声器。1、2、3 组 (SPK08FT) 为主音响；第 4 组 (SPK08FT) 为讲台监听；第 5 组 (X8A) 为部门音响。
  • 所有扬声器安装在 TP-1 三脚架上，并向下倾斜约 5 度。
  • 扬声器高度设为 2.5 米，只有 SPK-1.2 须设为 2.4 米。
  • 使用 5 公斤沙袋固定三脚架。
🗺️ 查看相关图纸（图纸 1-2, 4-1, 6-8）
1-2 Audio Equipment Layout Plan showing loudspeaker positions, audio headend, and sound coverage direction / 音频设备布局图，显示扬声器位置、音频主控设备及声音覆盖方向

4-1 Stage Area Equipment Layout Large Scale View showing microphones, speakers, monitors, LED walls, and power distribution around the stage / 舞台区域设备布局大比例图，显示麦克风、扬声器、显示器、LED 屏幕及舞台电源分配

6-8 Audio Equipment Schedule listing microphones, wireless receivers, audio interfaces, intercom equipment, loudspeakers, and related audio equipment / 音频设备清单，列出麦克风、无线接收器、音频接口、对讲设备、扬声器及相关音频设备

4. 连接线缆
图纸：6-2 扬声器接线图、6-3 讲台及部门扬声器接线图

  • 将已铺设的 Speakon 线缆连接到第 1–4 组扬声器，并将 XLR 音频线连接到第 5 组有源扬声器。线。
  • 将电线连接好之后，才把扩音器升到需要的高度。
🗺️ 查看相关图纸（图纸 6-2, 6-3）
6-2 Loudspeaker Wiring Diagram showing SPK08FT loudspeaker connections, SpeakON splitters, and amplifier outputs / 扬声器接线图，显示 SPK08FT 扬声器连接、SpeakON 分配器及功放输出

6-3 Audio Loudspeaker Wiring Diagram showing main stage monitor speakers and stage department sound connections / 讲台及部门扬声器接线图，显示主舞台监听扬声器及舞台部门声音连接

完成检查表

  • 距离已测量
  • 1-5 组扬声器已安装
  • 高度已设为 2.5 米（SPK-1.2 为 2.4 米）
  • 倾斜度已设为向下 5 度
  • 三脚架已使用沙袋固定
  • 升起前已连接线缆
  • 负责人已检查确认

拆卸步骤

  • 在星期日节目结束 30 分钟后，等待整个部门的简短会议和祷告后再开始拆除工作。
  • 降下三脚架并小心拔除所有线缆。
  • 收集所有设备并带到指定区域。
  • 组长注意： 在将每个箱子或设备箱搬上卡车前，请使用物料清单 (BOM) 核对并划掉每一项：
    • PLS-1
    • ALS-4
    • TP-1
    • SES-1