Schematics and equipment overview

Schematics and equipment overview

The CABR-2026 schematic (final draft) is ourthe drawing set for this assembly. You can downloadDownload the full drawing set (PDF)PDF. The October BOM is the equipment authority.list.

Measurements

If you are a crew member, you do not need to memorize this page. Follow your keyman and cableyour reachteam's areshort stillinstructions. checkedKeymen use the exact measurements and connections below.

If the room does not match the drawing, stop and tell JP or Alex. Do not change the design on site,your andown. AlexAny approveschange anythat change.affects the approved design must be confirmed through LBD.

Sheet	TitleWhat it shows	UsedMain byteams
1-1	Seating Areaand Loudspeakerssix Layoutpassive-loudspeaker Planpositions	Loudspeakers, Audio Cabling, A/V Booth
4-1	Stage Areamicrophones, Largemonitors Scaleand Viewpower routes	Stage, Power, Audio Cabling, Loudspeakers
6-1	AudioA/V Headendbooth Wiringand Diagramaudio connections	A/V Booth, Audio Cabling, Stage
6-2	LoudspeakersPassive Wiringand Diagramactive loudspeaker connections	Loudspeakers, Audio Cabling, Power

🗺️ View Sheet 1-1

Sheet 1-1 — Seatingseating Areaand Loudspeakers Layout Planloudspeakers

🗺️ View Sheet 4-1

Sheet 4-1 — Stagestage Area Large Scale Viewarea

🗺️ View Sheet 6-1

Sheet 6-1 — AudioA/V Headendbooth Wiring Diagramwiring

🗺️ View Sheet 6-2

Sheet 6-2 — Loudspeakersloudspeaker Wiring Diagramwiring

The area numbers used in this book (area 4 First Aid, area 9 Audio, table 10 Video/Media desk, area 11 Baptism area) come from the venue layout:

🗺️ View the venue layout (area numbers)

Venue Layout (area numbers)

SeatingHeavy cases

From sheet 1-1

SectionsCase	ChairsMain contents	Size

Weight Seats/ handling Front: A, B, CAHEC-2/1 16Audio chairs × 9 rowsrack 825 mkg wide— ×use 9a m long up to 144 eachhelper Back: D, E, FPLS-1 16Six chairspassive × 7 rowsloudspeakers 8150 mkg, widewheeled ×— 7Trucking mhelp longon (2 m shorter) up to 112 eachFriday TotalTP-1 Six speaker tripods 100 kg, wheeled — Trucking help on Friday ALS-4 aboutFour 768active loudspeakers 50 kg, wheeled SES-1 Ten 5 kg sandbags 50 kg total — unload one at a time MS-1 Microphone stands 30 kg, wheeled PCS-2 Power equipment 50 kg, wheeled CPS-1 Cable covers and mats 60 kg, wheeled

Aisles between sections are about 3 m (sheet 1-1). The total is approximate: the A/V booth in section B and the speaker corners in sections A and C take a few seats.

---

Equipment cases

Any case over 20 kg needs enough helpers. Please rollRoll wheeled cases and unloadclose SES-1all (safetylatches equipment)before sandbagsmoving one at a time.them.

Keyman Case Contents Weight Team AHEC-2/1 (audio headend rack) DSP, mixers, amplifiers 25 kg (rack case) A/V Booth AHEC-2/2 (audio headend flight case) Six microphones, two USB audio interfaces, cables and accessories 10 kg A/V Booth, Stage AMC-3 (audio multicore) 30 m; 8 XLR inputs, 4 XLR returns 15 kg Audio Cabling ASC-01 (XLR cable set) 5 × 5 m, 2 × 10 m, 10 × 20 m 20 kg Audio Cabling, Stage PLS-1 (passive loudspeaker set) Six SPK08FT speakers, cables and extenders 150 kg, wheeled Loudspeakers ALS-4 (active loudspeaker set) Four TOPP Pro X-8 active speakers; each needs mains power 50 kg, wheeled Loudspeakers TP-1 (speaker tripods) Six adjustable tripods, for the passive speakers 100 kg, wheeled Loudspeakers SES-1 (safety equipment) Ten 5 kg sandbags 50 kg (box) Loudspeakers MS-1 (microphone stands) Six manual floor stands 30 kg, wheeled Stage PCS-2 (power distribution set) Power cables and sockets 50 kg, wheeled Power CPS-1 (cable protection set) Ten 3-channel covers, ten rubber mats 60 kg, wheeled Audio Cabling, Power CPS-3 (cable protection set) Carpet strips 7 kg Audio Cabling, Power VES-1 (video equipment set) SDI and HDMI cables, video converters not listed A/V Booth TB-1 (toolbox) Tools 10 kg Shared

Not in the BOM: at least two venue wireless microphones and their receivers, the venue HDMI extender transmitter for the projectors, and the two media PCs (arranged by Alex). No cameras.

---

Key points from the drawingsreference

Item	Arrangement

Sheet Passive speakers Six SPK08FT on TP-1 tripods, about 5° down.down; Heightnormally 2.5 m (SPK-1.2:high, 2.4 m). 1-1 Front group Amplifier output A → LSCS-01 → SPK-1.1 and SPK-1.2;except SPK-1.2 linksat to2.4 SPK-1.3. 6-2 Rear group Amplifier output B → LSCS-02 → SPK-2.1 and SPK-2.2; SPK-2.2 links to SPK-2.3. 6-2m. Stage monitors Two TOPPactive Pro X-8 on the stage, fedspeakers from AMC-3 return A (Stage Left links to Stage Right). 4-1, 6-2A. Lobby and Accounting Two TOPPactive Pro X-8 on wall sockets, fedspeakers from AMC-3 return B (Lobby links to Accounting). 6-2B. Microphones MIC-11–4 to MIC-4 → AMC-3 inputs 1–4.4; Venuevenue wireless receivers →to inputs 5–6. 6-1 Media PCscomputers PC-1 (media PC) →through AIF-1 (USB audio interface) → AMC-3to input 7.7; PC-2 (media PC) →through AIF-2 (USB audio interface) → AMC-3to input 8. 6-1 Projectors PC-1 HDMI →to the venue HDMI extender transmitter. 6-1 DSP outputs Output 3 → AMC-3to return A (stage monitors);A; output 5 →to return B (lobby and Accounting).B. Output 4 is not used. Confirmed by LBD. 6-1 Power The left outlet on sheet 4-1 feeds the A/V booth; the right outlet feeds equipment on and behind the stage. 4-1

GoodThe tovenue know
also •provides Sheetat 6-1least labelstwo wireless microphones and the HDMI extender. Alex arranges the two AMC-3media returncomputers. cablesThese "SPK-3.2"items andare "SPK-4.2".not Please follow sheet 6-2: return A = stage monitors, return B = lobby and Accounting.
• The attached PDF isin the updatedBOM. drawingThere setare (2026/09/26).no cameras.