Schematics and equipment overview
The CABR-2026 schematic is the drawing set for this assembly. Download the full PDF. The October BOM is the equipment list.
If you are a crew member, you do not need to memorize this page. Follow your keyman and your team's short instructions. Keymen use the exact measurements and connections below.
Important:
If the room does not match the drawing, stop and tell JP or Alex. Do not change the design on your own. Any change that affects the approved design must be confirmed through LBD.
Sheet
What it shows
Main teams
1-1
Seating and six passive-loudspeaker positions
Loudspeakers, Audio Cabling, A/V Booth
4-1
Stage microphones, monitors and power routes
Stage, Power, Audio Cabling, Loudspeakers
6-1
A/V booth and audio connections
A/V Booth, Audio Cabling, Stage
6-2
Passive and active loudspeaker connections
Loudspeakers, Audio Cabling, Power
View Sheet 1-1 — seating and loudspeakers
View Sheet 4-1 — stage area
View Sheet 6-1 — A/V booth wiring
View Sheet 6-2 — loudspeaker wiring
Heavy cases
Case
Main contents
Weight / handling
AHEC-2/1
Audio rack
25 kg — use a helper
PLS-1
Six passive loudspeakers
150 kg, wheeled — Trucking help on Friday
TP-1
Six speaker tripods
100 kg, wheeled — Trucking help on Friday
ALS-4
Four active loudspeakers
50 kg, wheeled
SES-1
Ten 5 kg sandbags
50 kg total — unload one at a time
MS-1
Microphone stands
30 kg, wheeled
PCS-2
Power equipment
50 kg, wheeled
CPS-1
Cable covers and mats
60 kg, wheeled
Any case over 20 kg needs enough helpers. Roll wheeled cases and close all latches before moving them.
Keyman reference
Item
Arrangement
Passive speakers
Six on TP-1 tripods, about 5° down; normally 2.5 m high, except SPK-1.2 at 2.4 m.
Stage monitors
Two active speakers fed from AMC-3 return A by
XLR cable
.
Lobby and Accounting
Two active speakers fed from AMC-3 return B by
XLR cable
.
Microphones
MIC-1–4 use
XLR cables
to AMC-3 inputs 1–4; the venue wireless receivers use
XLR cables
to inputs 5–6.
Media computers
Each PC connects to its AIF by
USB
; AIF-1 connects to AMC-3 input 7 by
XLR
, and AIF-2 to input 8 by
XLR
.
Projectors
PC-1 HDMI to the venue HDMI extender transmitter.
DSP outputs
XLR:
DSP output 3 to AMC-3 return A; output 5 to return B. Output 4 is not used.
The venue also provides at least two wireless microphones and the HDMI extender. Alex arranges the two media computers. These items are not in the BOM. There are no cameras.