Audio Cabling Setup
Audio Cabling Team / 音频布线组
Quick Navigation / 快速导航
- Purpose / 目的
- Before You Start / 开始前
- Setup Steps / 安装步骤
- Completion Checklist / 完成检查表
- Dismantling / 拆卸
- Related Pages / 相关页面
Purpose / 目的
English
Install, protect, and label all audio cabling according to the approved schematics before system commissioning.
中文
根据批准的示意图安装、保护并标识所有音频线缆，为系统调试做好准备。
Before You Start / 开始前
Required References / 参考资料
- Audio Schematics 1-2
- Audio Schematics 1-5
- Audio Schematics 4-1
Safety Notes / 安全提醒
| English | 中文 |
|---|---|
| Keep walkways clear. | 保持通道畅通。 |
| Protect all cables that cross walking areas. | 所有经过通道的线缆都必须加以保护。 |
| Do not secure cables permanently until routing is confirmed. | 确认走线路径前，不要永久固定线缆。 |
Setup Steps / 安装步骤
1. Install Snake Cable / 铺设主音频蛇线
📷 Photo: Add routing overview photo here.
English
Pull the snake cable according to schematic 1-5.
- Start at the front stage-left position.
- This is near the Video Control Area [2].
- Confirm the routing before securing the cable.
中文
按照图纸 1-5 铺设主音频蛇线。
- 从舞台前方左侧开始。
- 位置靠近视频控制区 [2]。
- 固定线缆前确认走线路径正确。
2. Install Speaker Cables / 铺设扬声器线缆
📷 Photo: Add speaker cable routing photo here.
English
Pull Speakon cables according to schematics 1-2, 1-5, and 4-1.
Connect the speaker groups:
- Group 1
- Group 2
- Group 3
- Group 4
中文
按照图纸 1-2、1-5 和 4-1 铺设 Speakon 扬声器线缆。
连接以下扬声器组：
- 第 1 组
- 第 2 组
- 第 3 组
- 第 4 组
3. Protect Cabling / 保护线缆
📷 Photo: Add example of correct cable protection here.
English
Protect all cables using tape, carpet covers, or floor cable channels.
Make sure all walkways remain safe.
中文
使用胶带、地毯覆盖物或地面线槽保护所有线缆。
确保所有通道安全可通行。
4. Carpet Cover Method / 地毯覆盖物方法
📷 Photo: Add close-up of carpet cover installation here.
| English | 中文 |
|---|---|
| Tape only one side at first. | 先固定一侧。 |
| Complete the cable installation. | 完成线缆安装。 |
| Tape the second side after installation is complete. | 安装完成后再固定另一侧。 |
Completion Checklist / 完成检查表
Setup / 安装
| Done | Task / 任务 |
|---|---|
| [ ] | Snake cable installed / 主蛇线已铺设 |
| [ ] | Speaker cables installed / 扬声器线缆已铺设 |
| [ ] | Routing matches schematics / 走线符合图纸要求 |
| [ ] | Cables protected / 线缆已保护 |
| [ ] | Walkways safe / 通道安全 |
| [ ] | Team leader inspection completed / 组长已检查确认 |
Dismantling / 拆卸
Steps / 步骤
| Step | English | 中文 |
|---|---|---|
| 1 | Gather all audio cabling. | 收集所有音频线缆。 |
| 2 | Remove carpet covers and floor channels. | 移除地毯覆盖物和线槽。 |
| 3 | Bring all equipment to the designated collection area. | 将所有设备带到指定集合区域。 |
| 4 | Confirm no cables remain in the seating area. | 确认座位区域没有遗留线缆。 |
Related Pages / 相关页面
- Loudspeaker Team / 扬声器组
- Stage Team / 讲台组
- Audio Booth Team / 音频控制台组