Skip to main content

Audio Cabling Setup

Audio Cabling Team / 音频布线组

Team Information / 小组信息

RoleItem / 角色项目 NameDetails / 姓名详情
Keyman / 负责人 To be assigned / 待安排
Assistant / 助手 To be assigned / 待安排
Team Size / 小组人数 To be assigned / 待安排 Schematics / 图纸 TBD

Team Members / 小组成员

# Name / 姓名
1 To be assigned / 待安排
2 To be assigned / 待安排
3 To be assigned / 待安排
4 To be assigned / 待安排
5 To be assigned / 待安排
6 To be assigned / 待安排

Keyman Responsibilities / 负责人职责

    Coordinate team activities and assignments.

    Ensure work follows the system schematic.

    Verify setup completion before reporting the task finished.

    协调小组工作和任务分配。

    确保所有工作按照系统图执行。

    在报告任务完成前确认安装质量。

    Purpose / 目的

    Install, protect, and label all audio cabling according to the approved system schematicSchematics before system commissioning.

    根据批准的系统图安装、根据图纸安装、保护并标识所有音频线缆，为系统调试做好准备。

    Required References / 参考资料

    • Audio System SchematicSchematics / 音频系统图图纸

    Safety Notes / 安全提醒

    • Keep walkways clear. / 保持通道畅通。
    • Protect all cables crossing walkways. / 所有经过通道的线缆都必须加以保护。
    • Confirm routing before securing cables. / 固定线缆前确认走线路径。

    Setup Steps / 安装步骤

    1. Install Snake Cable / 铺设主音频蛇线

    📷 Add routing overview photo herehere.

    • Pull the snake cable according to the system schematic.Schematics.
    • Start at the front stage-left position.
    • Verify routing before securing the cable.

    按照系统图铺设主音频蛇线。按照图纸铺设主音频蛇线。

    • 从舞台前方左侧开始。
    • 固定线缆前确认走线路径正确。

    2. Install Speaker Cables / 铺设扬声器线缆

    📷 Add speaker cable routing photo herehere.

    • Pull all speaker cables according to the system schematic.Schematics.
    • Connect each loudspeaker group.
    • Verify cable labels before connection.

    按照系统图铺设所有扬声器线缆。按照图纸铺设所有扬声器线缆。

    • 连接各扬声器组。
    • 连接前确认线缆标签正确。

    3. Protect Cabling / 保护线缆

    📷 Add cable protection photo herehere.

    • Use tape, carpet covers, or floor cable channels where required.
    • Ensure all walkways remain safe.

    根据需要使用胶带、地毯覆盖物或线槽保护线缆。

    确保所有通道安全可通行。

    4. Install Carpet Covers / 安装地毯覆盖物

    📷 Add carpet cover photo herehere.

    • Tape one side first.
    • Complete cable installation.
    • Tape the second side after final verification.

    先固定一侧。

    完成线缆安装后，再固定另一侧。

    Completion Checklist / 完成检查表

    • Snake cable installed / 主蛇线已铺设
    • Speaker cables installed / 扬声器线缆已铺设
    • Routing matches schematicSchematics / 走线符合系统图走线符合图纸
    • Cables protected / 线缆已保护
    • Walkways safe / 通道安全
    • Team leaderKeyman inspection completed / 组长已检查确认负责人已检查确认

    Dismantling / 拆卸

    Procedure / 步骤

    1. Gather all audio cabling. / 收集所有音频线缆。
    2. Remove carpet covers and floor channels. / 移除地毯覆盖物和线槽。
    3. Bring all equipment to the designated collection area. / 将所有设备带到指定集合区域。
    4. Confirm no cables remain in the seating area. / 确认座位区域没有遗留线缆。
    • Loudspeaker Team / 扬声器组
    • Stage Team / 讲台组
    • Audio Booth Team / 音频控制台组