Skip to main content

Audio Cabling Setup / 音频线缆安装

🎤 Audio Cabling Team / 音频布线组

Team / 小组 Members / 成员
Audio Cabling / 音频布线安装 • Prasert🔑
• Zabrina 柏莉娜
• Siiri

🇬🇧 English Instructions

Purpose
Install, protect, and label all audio cabling according to the schematics before system commissioning.

⚠️ Safety & Installation Notes
• Keep walkways clear.
• Protect all cables crossing walkways.
• Confirm routing before securing cables.
• Installation Note: When putting carpet covers down, tape one side only. Tape the other side once installation is finished.

Required References

  • Full Drawing Set: 📎 Complete PDF
  • Event Content List: Cases AMC-1, ASC-01, CPS-1, CPS-3

Required Equipment Cases

  • AMC-1: Contains a 60 m audio multicore cable (also known as a snake cable) on a reel.
  • ASC-01: Contains XLR cables (5m, 10m, and 20m lengths).
  • CPS-1: Contains 10x 3-channel plastic flap floor cable protectors and 10x rubber mats.
  • CPS-3: Contains carpet strips for covering cables.

Setup Steps

1. Install the Audio Multicore Cable
Schematics: Pages 1-2 Audio Equipment Layout Plan and 1-5 Cable Pathway Plan

  • Route the audio multicore cable (AMC-1), also known as the snake cable, according to the schematics.
  • Begin at the AMC-1 starting position at front stage left (p. 1-2), near the Video Control Area, between [2] and [3] (p. 1-5).
🗺️ View AMC-1 Location and Cable Route (Pages 1-2 and 1-5)
1-2 Audio Equipment Layout Plan showing the AMC-1 starting position, loudspeaker locations, audio headend, and sound coverage direction / 音频设备布局图，显示 AMC-1 起点、扬声器位置、音频主控设备及声音覆盖方向

1-5 Cable Pathway Plan showing the AMC-1 cable route, control areas, and walkway cable protection points / 电缆路径图，显示 AMC-1 线缆路线、控制区域及走道线缆保护位置

2. Install Speaker Cables
Schematics: Pages 1-2 Audio Equipment Layout Plan, 1-5 Cable Pathway Plan, 4-1 Stage Area Equipment Layout

  • Route all loudspeaker cables according to the schematics: Speakon cables for Groups 1–4 and XLR cables from ASC-01 for Group 5. Verify the cable labels before routing.
🗺️ View Associated Schematics (Pages 1-2, 1-5, 4-1)
1-2 Audio Equipment Layout Plan showing loudspeaker positions, audio headend, and sound coverage direction / 音频设备布局图，显示扬声器位置、音频主控设备及声音覆盖方向

1-5 Cable Pathway Plan showing cable routes, control areas, and walkway cable protection points / 电缆路径图，显示线缆路线、控制区域及走道线缆保护位置

4-1 Stage Area Equipment Layout Large Scale View showing microphones, speakers, monitors, LED walls, and power distribution around the stage / 舞台区域设备布局大比例图，显示麦克风、扬声器、显示器、LED 屏幕及舞台电源分配

3. Protect Cabling
Schematics: Pages 1-5 Cable Pathway Plan, 4-1 Stage Area Equipment Layout

  • Use tape, carpet covers, and floor cable channels (rubber covers) where required to cover and protect cables. Ensure all walkways remain safe. Use cable channels when crossing a walkway, and carpet covers for cables under chairs.
🗺️ View Cable Protection Schematics (Pages 1-5, 4-1)
1-5 Cable Pathway Plan showing cable routes, control areas, and walkway cable protection points / 电缆路径图，显示线缆路线、控制区域及走道线缆保护位置

4-1 Stage Area Equipment Layout Large Scale View showing microphones, speakers, monitors, LED walls, and power distribution around the stage / 舞台区域设备布局大比例图，显示麦克风、扬声器、显示器、LED 屏幕及舞台电源分配

Completion Checklist

  • Audio multicore cable (AMC-1) installed
  • Speaker cables installed (Groups 1-4)
  • Routing matches schematics
  • Cables protected (tape and covers secured)
  • Walkways safe
  • Keyman inspection completed

Dismantling Procedure

  • Wait for the department briefing and prayer 30 minutes after the program ends on Sunday before dismantling.
  • Gather all audio cabling and bring it to the designated area.
  • Remove carpet covers and floor channels. Gather all rugs used to hold down cabling too.
  • Confirm no cables remain in the seating area.
  • Note for team leader: Use the Bill of Materials (BOM) to cross off every box or case before it is brought to the truck:
    • AMC-1
    • ASC-01
    • CPS-1
    • CPS-3

🇨🇳 中文说明

目的
根据图纸安装、保护并标识所有音频线缆，为系统调试做好准备。

⚠️ 安全与安装提示
• 保持通道畅通。
• 所有经过通道的线缆都必须加以保护。
• 固定线缆前确认走线路径。
• 安装提示： 铺设地毯压线盖时，先只用胶带固定一侧。等整体安装完成后再固定另一侧。

参考资料

所需设备箱

  • AMC-1： 包含一条安装在线盘上的 60 米音频多芯线缆（也称“蛇线”）。
  • ASC-01： 包含 XLR 音频线缆（5 米、10 米和 20 米长度）。
  • CPS-1： 包含 10 个 3 槽塑料地面线缆保护盖板和 10 个橡胶垫。
  • CPS-3： 包含用于保护线缆的地毯压线条。

安装步骤

1. 铺设音频多芯线缆
图纸：1-2 音频设备布局图和 1-5 电缆路径图

  • 按照图纸铺设音频多芯线缆（AMC-1，也称“蛇线”）。
  • 从讲台前区左侧、靠近视频控制区的 AMC-1 起点开始铺设。该位置位于 [2] 和 [3] 之间。
🗺️ 查看 AMC-1 起点及线缆路线（图纸 1-2 和 1-5）
1-2 Audio Equipment Layout Plan showing the AMC-1 starting position, loudspeaker locations, audio headend, and sound coverage direction / 音频设备布局图，显示 AMC-1 起点、扬声器位置、音频主控设备及声音覆盖方向

1-5 Cable Pathway Plan showing the AMC-1 cable route, control areas, and walkway cable protection points / 电缆路径图，显示 AMC-1 线缆路线、控制区域及走道线缆保护位置

2. 铺设扬声器线缆
图纸：1-2 音频设备布局图、1-5 电缆路径图、4-1 舞台区域设备布局图

  • 按照图纸铺设所有扬声器线缆：第 1–4 组使用 Speakon 线缆，第 5 组使用 ASC-01 设备箱中的 XLR 音频线。铺设前确认线缆标签正确。
🗺️ 查看相关图纸（图纸 1-2, 1-5, 4-1）
1-2 Audio Equipment Layout Plan showing loudspeaker positions, audio headend, and sound coverage direction / 音频设备布局图，显示扬声器位置、音频主控设备及声音覆盖方向

1-5 Cable Pathway Plan showing cable routes, control areas, and walkway cable protection points / 电缆路径图，显示线缆路线、控制区域及走道线缆保护位置

4-1 Stage Area Equipment Layout Large Scale View showing microphones, speakers, monitors, LED walls, and power distribution around the stage / 舞台区域设备布局大比例图，显示麦克风、扬声器、显示器、LED 屏幕及舞台电源分配

3. 保护线缆
图纸：1-5 电缆路径图、4-1 舞台区域设备布局图

  • 根据需要使用胶带、地毯和线缆盖板覆盖并保护线缆。确保所有通道保持安全畅通。线缆穿越通道时必须使用橡胶过线槽进行保护，椅子下方使用地毯压线盖。
🗺️ 查看线缆保护相关图纸（图纸 1-5, 4-1）
1-5 Cable Pathway Plan showing cable routes, control areas, and walkway cable protection points / 电缆路径图，显示线缆路线、控制区域及走道线缆保护位置

4-1 Stage Area Equipment Layout Large Scale View showing microphones, speakers, monitors, LED walls, and power distribution around the stage / 舞台区域设备布局大比例图，显示麦克风、扬声器、显示器、LED 屏幕及舞台电源分配

完成检查表

  • 音频多芯线缆（AMC-1）已铺设
  • 第 1-4 组扬声器线缆已铺设
  • 走线符合图纸
  • 线缆已保护（胶带和盖板已固定）
  • 通道安全
  • 负责人已检查确认

拆卸步骤

  • 在星期日节目结束 30 分钟后，等待整个部门的简短会议和祷告后再开始拆除工作。
  • 收集所有音频线缆并带到指定集合区域。
  • 移除地毯覆盖物和地面线槽。收集所有用于固定线缆的地毯。
  • 确认座位区域没有遗留线缆。
  • 组长注意： 在将每个箱子或设备箱搬上卡车前，请使用物料清单 (BOM) 核对并划掉每一项：
    • AMC-1
    • ASC-01
    • CPS-1
    • CPS-3