Setup teams and handoffs

Thank you for helping with the assembly setup on Saturday, 10 October. This is the best page to start from. Find your team below, then open that team's page for the detailed instructions.

Before setup:
Everyone helping with installation or dismantling — including helpers who are not normally part of A/V — should download and review A-149-E (PDF). Each A/V keyman will also review the team's DC-83 job hazard analysis before work begins.

Key times for Saturday

08:00 — Meet at the venue for the safety talk and prayer. Keymen then review the DC-83 and work area with their teams. After the talk — Power, Audio Cabling, Loudspeakers, Stage and A/V Booth begin together. By 12:00 — Installation should be ready to hand over to Alex for commissioning and system tests. By 14:00 — AHEC commissioning should be complete so attendees can enter.

Find your team

Your team page has the drawings and step-by-step instructions. The current Saturday team members are also listed here so you can quickly see where you are assigned.

Audio Cabling — Lacey Cox 🔑
Ruben Martinez; Zabrina Bourgeois; Karina Li; Layo Kirby; TaSanee Kirby; Ronan Gav Budd; Meyana Barnhart A/V Booth — Micah Phillips 🔑
Nico Martinez; Mint Phillips Stage — Jason Kirby 🔑
Gerald Berard; SuMalei Kirby; Matthew Chappelle; Cameron Korell Loudspeakers — Corey DeLoach 🔑
Melissa DeLoach; Mike Vigil; Lilia Vigil; Mike Mundell; Bethany Mundell Power — Jeff Korell 🔑
April Korell

Come prepared: Wear suitable work shoes and bring work gloves. Follow your keyman's instructions if additional PPE is needed.

If you are also helping with Friday delivery or unloading, see Friday transport and Saturday installation.

If you are unsure which team you are on, please ask JP before starting work.

How teams help each other

From	To	What to hand over
Audio Cabling	Loudspeakers	A labelled speakON loudspeaker cable at each passive-speaker position before the speaker is raised.
Audio Cabling	A/V Booth	The labelled AMC-3 audio-multicore tails and speakON speaker-output cables at the booth.
Audio Cabling	Stage	The AMC-3 stage box in place and the XLR microphone cables ready.
Power	A/V Booth	The booth supply checked and handed over before anything is switched on.
Power	Loudspeakers	A safe power source confirmed for every active speaker.
All teams	Alex	Tell Alex when the installation is ready for testing.

Start early on the booth power, 30 m AMC-3 audio multicore (snake) cable, the six passive loudspeakers with their speakON cables, and the Stage team's XLR microphone runs. This lets testing begin while smaller tasks are still being finished.

Keep exits and walkways clear, protect every floor crossing, and ask your keyman if anything in the room does not match the current drawing.

Sunday teardown teams are not final. They will be added after the live roster is updated. Do not use the Saturday setup teams as a teardown assignment.